The Advanced Combat Helmet (ACH) is the United States Army's current combat helmet, used since the mid-2000s. It was developed by the United States Army Soldier Systems Center to be the next generation of protective combat helmets for use by the U.S. Army. The ACH is derived from the Modular Integrated Communications Helmet. The ACH is currently in the process of being phased out and replaced by the Enhanced Combat Helmet (ECH), an improvement upon the ACH derived from its design.
Video Advanced Combat Helmet
History
2000s
The Advanced Combat Helmet was first fielded beginning in 2002 in limited numbers to eventually replace the PASGT helmet.
In 2007 the Army introduced a ballistic "nape pad" that attaches to the ACH's rear suspension system. 430,000 were to be issued in the Rapid Fielding Initiative (RFI).
In 2006, 102,000 helmets were ordered from ArmorSource, of which 99,000 were delivered when the contract was fulfilled and properly closed.
Beginning in 2008, the Army's Program Executive Office Soldier outfitted soldiers of the 101st Airborne Division and 4th Infantry Division bound for Iraq with helmet-mounted sensors designed to gather data on head injuries (or traumatic brain injuries) caused during Improvised Explosive Device (IED) detonations. The data collected will help with the design of improvements to the MICH's suspension and chin strap systems.
In May 2009, 55,000 of these were in storage and 44,000 were in use U.S. Army, Navy, and Air Force personnel. The 44,000 helmets in use by service members were recalled by the U.S. Army in May 2010 due to potentially defective materials being used. No proof of defective materials was ever established nor evidence of any wrongdoing by the contractor.
In May 2009, 34,218 ACHs made by the Gentex Corporation were recalled. Certain screws attaching the chinstrap and other parts to the helmet did not conform to specifications in the contract. The screws failed ballistics tests at extreme temperatures. Gentex alleges its subcontractor had fabricated compliance certificates for the screws.
A MultiCam cover for the Advanced Combat Helmet began fielding in late 2009 for soldiers deployed in Afghanistan.
2010s
On March 7, 2016 Armorsource LLC agreed to pay $3 Million to settle False Claims Act allegations.
The ACH and Lightweight Helmets will eventually be replaced by the Enhanced Combat Helmet.
Maps Advanced Combat Helmet
Design
The shape of the ACH is virtually identical to the MICH TC-2000. Compared to the PASGT helmet, the front brow is eliminated to improve upwards visibility and allow easier mounting of night-vision goggle brackets. The side brim has been raised to the point that the entire lower brim of the helmet is "flat" compared to the PASGT which curves upwards at the back. This is to allow greater compatibility with communications headsets and improve hearing when headsets are not used.
The ACH uses ballistic fiber such as Kevlar and Twaron.
In 2007 the Army developed and introduced a ballistic "nape pad" that attaches to the ACH's rear suspension system and coincided with the introduction of the Improved Outer Tactical Vest (IOTV). The pad reduces soldier deaths from shrapnel wounds to the neck and lower head.
Variants
The Generation II Lightweight Advanced Combat Helmet, or LW ACH, weighs one pound less than the original ACH while offering the same ballistic protection.
![PlayerStudio] Advanced Combat Helmet (TR) : Planetside](https://lh3.googleusercontent.com/blogger_img_proxy/AEn0k_s312cOGRVAP9-tufk10JHwvQk0L2lMtPOROiY2lA91_tF8G7jXzj_IdIh-hRi827lkG22rDXd1bfTN-tpuhbvAyuJdI2vLJrmGYyPj0qp8so8lUjFpg_oIJz4c9BZ0rX5n4BXsJ7KQWpHCuQ=s0-d "PlayerStudio] Advanced Combat Helmet (TR) : Planetside")
Users
- Macedonia: ACH helmets made by Eurokompozit used by the Macedonian Police's Special Task Unit "Tigers".
- United States: Used by the U.S. Army.
Notes
References
External links
- Official ACH webpage from Gentex
Source of the article : Wikipedia
0 Comments